SFE Footprint Library Eagle
From Open Circuits
Spark Fun Electronics' preferred foot prints. We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at http://www.sparkfun.com. Please also note that we guarantee that there are some messed up footprints in this library. We've tried to note which are proven and tested but by downloading this file, you acknowledge that you are using this file at your own risk. We cannot be held responsible for faulty PCBs. Always check your parts against a 1:1 printout.
Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
This is the complete Spark Fun Electronics default foot prints for Eagle. We switched to Eagle back in 2006 and have been extremely impressed with its ease of use and flexibility. As with any new software, it's like learning a new language and takes time. Do it. Eagle is great. If you need more information about how to use Eagle, checkout our Eagle Tutorials.
Here is a link to the SparkFun Eagle Library dated November 3rd 2009. 415 current devices. 603 footprints. New parts worth noting:
- L298N - L298N (MultiWatt15 package)
- ZIF Socket 28-Pin 0.3" - 28-pin ZIF Socket, one specifically for the ATmega168, and another for a generic 28-pin device
- ZIF Socket 40-Pin 0.6" - 40-pin ZIF Socket
- Thumb Slide Joystick - Thumb slide joystick ala those in the PSP1000
- ILD213 Optoisolator - Dual Channel Optoisolator (SO8 Package)
- LM358 Op-Amp - Dual Channel LM358 op-amp (DIP8 Package)
- SmartCard Connector - SMD Socket for SmartCards
- LPR5xxx Gyro - SMD Dual axis (pitch/roll) gyro
- LPY5xxx Gyro - SMD Dual axis (pitch/yaw) gyro
- XMOS XS1-L1-64 - XMOS's XS1-L1 general purpose, multi-threaded processor
Here is a link to the SparkFun Eagle Library dated July 28th 2009. 356 current devices. 540 footprints. New parts worth noting:
- Blackberry Trackball - Small magneto trackball
Errors:
- The ATtiny45 device has an incorrect mapping between pins and pads. Don't use it.
Here is a link to the SparkFun Eagle Library dated March 30th 2009. 320 current devices. New parts worth noting:
- Venus GPS - Venus GPS Receiver
- New Creative Commons License
Here is a link to the SparkFun Eagle Library dated January 8th 2009. 284 current devices. New parts worth noting:
- Thumb Joystick - PS2 Analog Joystick
Here is a link to the SparkFun Eagle Library dated October 6th 2008. 276 current devices. New parts worth noting:
- Alcohol Gas Sensor - BAC gas sensor
- RFID Reader - For ID-2, ID-12, and ID-20 RF ID modules
- RGB Through-hole LED - Super common RGB LED
- 16x2 LCD - Footprint for our easy to use 16 character by 2 line alphanumeric display
- LIS302DL Accelerometer - We added quite a few IC footprints for new accelerometer ICs coming out
- MN5010 GPS Reciever - Very small GPS receiver
- QRD1114 Sensor - Great for line following or presence detection
- Relays - Added footprints for our three types of relays
- JST Battery Connectors - Horizontal and vertical connectors found on our batteries
- RCA Jack - Popular video and audio connector
- RJ Jacks - Added MagJack, RJ45, RJ11, and RJ9 jacks
- Screw Terminals - Added 2 and 3 pin terminals of the 3.5mm and 5mm varieties
- Heart Rate Module - Polar Heart Rate Module
- Rocker Switch - Good for power and user input switches
- FM Receiver - Great little module for FM radio reception
- Bluegiga Module - Powerful bluetooth module
Here is a link to the SparkFun Eagle Library dated February 20th 2008. 197 current devices. New parts worth noting:
- 3.5mm Audio Jack - Super common audio jack
- ADJD Color Sensor - New color sensor from Avago
- AVR 6 Pin adapter - Smaller ISP connector means smaller PCB!
- ET312 - Footprint update (again). This one was pretty evil. Now newer, and more improved, and gooder.
- DB25 Connector - Parallel port connector
- Male iPod Connector
- Luxeon LED - New footprint for these super bright LEDs
- miniDIN6 Connector - We're playing with PS2!
- Vibration Motor - Good footprint for this neat motor
- nRF24L01 - Popular low power RF Transceiver
- nRF2401A - Popular RF Transceiver
- FM Xmitter - Nifty, compact FM radio transmitter footprint
Here is a link to the SFE Eagle Library dated June 6th 2007. 164 current devices. New parts worth noting:
- SKU numbers updated on all parts
- SparkFun logo updated
- DB9 Connector - Footprint correction
- EB-85A - 5Hz update GPS receiver connector added
- EM406 Connector
- ET312 - Footprint update
- GR-10 - Tiny GPS Recevier
- Tri-color SMD LED
- Melexis Gyro MLX90609
- TEMT6000 Light Sensor
- SHT15 Humidity Sensor
Here is a link to the SFE Eagle Library dated March 2nd 2007. 132 current devices. Some worth noting:
- ADXL330
- AVR Parts
- Battery Holders
- Bluetooth Module
- Button Pad for LEDs
- Buzzer
- CMOS Camera and Connector
- Copernicus GPS Module
- CP2102 CP2103
- Crystals and Resonators
- DB9
- FTDI parts FT232RL FT245RL
- GE863 Cellular module with GPS
- GM862 Cellular Module with GPS
- HMC Parts including HMC6352 Compass
- IDG300 Dual axis Gyro
- iPod Connectors
- Lassen iQ GPS
- LCDs
- LPC2138 LPC21xx
- MAX232
- MiRF wireless module
- MMA7260
- Navigation Switch
- Nokia 6100 Color LCD
- PICs - mostly surface mount SSOPs
- Power Jacks
- SCP1000 Pressure Sensor
- SD and microSD sockets
- SHT15 Humidity Sensor
- SIM Card socket
- DIP Switches
- USB Connectors - Type A, Type B, miniB
- Voltage Regulators
- Airborne DPAC Wireless Module
Et al.
[edit] related
- See also PCB Footprints.
- Open Symbol Project, sponsored by Mark Whitis -- What is the best way to collaborate with this project?
- Eagle Links